Remove iron gate and framerepair hinge and frame to match existingrepair brick wall surround gate (approximately 2 x 4) using vcc approved mortar mix. Mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Reinstall repaired gate

All per materials and drawings approved by the ac 07/22/14 and stamped approved 07/24/14:replacing missing shutters: two-section fixed louvered, 3-panel, and board-and-batten,repairing shutters, hardware, doors, windows, and trim to match existing,repointing all masonry walls and repairing stucco finish,installing a 12x12 catch basin,repairing marble entry steps, andpainting to matchother policy guided repairsmortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stucco: base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water